MAGNER 910 Operation Manual V1.1
Page 11 of 18
OK” and flash. At this moment, you need to clear the drawer for 2.00
and press CLR to clear the message, otherwise other key functions are
not workable.
(2)
VALUE
VALUE SET
VALUE:
CHANNEL:
1
2.00
Under VALUE interface
,
press
,
key to switch the channel.
Under one channel, press SET key to fix the VALUE setting mode, the
VALUE will flash. At this moment, you can change the value of this
channel through pressing numeric key 0 ~ 9. Press CLR key, the
setted the value can be cleared to be 0
Notes: The value is already set in the factory and the function is
locked, so the user can not change the value.
When one channel Value No. setting is finished, you can come
back to channel number selection interface by pressing SET key and
then repeat the above number setting way to set value number for
other target channels. After all settings are finished, press ESC key to
quit from VALUE submenu to come back into main menu interface.
(3)
SYSTEM
SYSTEM SET
5.MAGNET
4.PRINT
1.TIME
>
2.BUZZER
3.POINT
Firstly, it will enter into SYSTEM SET submenu, press
or
key to make
t
he cursor up and down. And then press SET key to enter
different setting interface.
1. TIME