MAGNAWELD RS 200 MK, User Manual, Page: 11 / 156

11 RS 200 MK - RS 250 MK - RS 300 MK - RS 350 MK - RS 400 MK
EN
www.magmaweld.com USER MANUAL
TECHNICAL INFORMATION
1.1 General Information
RS 200 MK, RS 250 MK, RS 300 MK, RS 350 MK and RS 400 MK are 3 phase step controlled, constant voltage
industrial compact MIG/MAG machines to weld all types of solid and flux cored wires in any kind of
fabrication and repair work shops. Wire feeding unit is a robust 4 wheel drive system which is placed inside
of the machine. This way of construction, harness and excessive cabling has been avoided. Even though you
can manufacture 24/7 with these machines in a big range of current scale, model RS 200 MK is optimized for
0.8 mm, model RS 250 MK, RS 300 MK , RS 350 MK for 1.0 mm, model RS 400 MK for 1.2 mm. These machines
are fan cooled and thermally protected against overheating.
1.2 Machine Components
Figure 1 : Front and Back View
1-
Wire Speed Setting Button
2-
Trigger Mode Switch
3-
Torch Connector
4-
Earth Clamp Cable Entry (-)
5-
Braked Wheel
6-
Digital Ammeter
7-
Digital Voltmeter
8-
Fine Step Switch
9-
Closing and Coarse (Tension) Setting Switch
10-
Welding Parameters Table
11-
Swivel Wheel
12-
Lifting Eye
13-
Fuses
14-
Gas Inlet
15-
CO 2 Heater Receptacle
16-
Mains Cable
17-
Handle
18-
Drum Feeding
19-
Gas Cylinder Safety Chain
20-
Wheel
17
18
19
20
6
7
8
9
10
11
12
13
14
15
16
2
3
4
5
1
Technical Information