3
Safety Precautions
Please read through these instructions before you start the
installation process. Improper installation can cause damage
to the unit, your personal property, and also poses a personal
safety hazard.
-Installation must be performed according to the installation
instructions. Improper installation can cause water leakage,
electrical shock, or fire.
-Use only the included accessories and parts, and specified
tools for the installation. Using non-standard parts can cause
water leakage, electrical shock, fire, and injury or property
damage.
-Make sure that the outlet you are using is grounded and has
the appropriate voltage. The power cord is equipped with a
three-prong grounding plug to protect against shock. Voltage
information can be found on the side of the unit, behind the
grille.
-Install the unit on a flat, sturdy surface. Failure to do so
could result in damage or excessive noise and vibration.
-The unit must be kept free from obstruction to ensure proper
function and to mitigate safety hazards.
-DO NOT modify the length of the power cord or use an
extension cord to power the unit. DO NOT share a single
outlet with other electrical appliances. Improper power supply
can cause fire or electrical shock.
-DO NOT install your air conditioner in a wet room such as
a bathroom or laundry room. Too much exposure to water
can cause electrical components to short circuit.
-DO NOT install the unit in a location that may be exposed
to combustible gas, as this could cause fire.
-The unit has wheels to facilitate movement. Make sure not
to use the wheels on thick carpet or to roll over objects, as
this could cause unit to fall.
-DO NOT operate the unit that has been dropped or damaged.
-DO NOT allow children to play with the air conditioner.
Children must be supervised around the unit at all times.
- If the air conditioner is knocked over during use, turn off the
unit and unplug it from the main power supply immediately.
Visually inspect the unit to ensure there is no damage. If you
suspect the unit has been damaged, contact a technician or
customer service for assistance.
-During a thunderstorm, the power must be cut off to avoid damage
to the machine due to lightning.
