Magnavox MX2000, Owner'S Manual, Page: 14 / 30

Setting Up Professional Monitoring Service
Monitoring is the most important aspect of home security and maximizes the use of your system. Your new Home Security System has a
feature that can be programmed to connect the professional monitoring service when an intrusion is detected. For a small monthly fee,
the professional monitoring service will monitor your system
24 hours a day, every day of the year. When security is breached, your
Central Controller will automatically send a digital alarm signal to the central monitoring station. An Alarm Monitoring Agent will imme-
diately call your home to verify the status of the alarm. The Monitoring Agent will then dispatch help by providing directions to your
home, as well as the exact location of the break in.
The Monitoring Agent can also be designated to call you at work, on a pager, on a
cellular phone, or at a neighbors.
To activate the monitoring service, call I-800-675-3082. A monitoring agreement will be mailed or faxed to you.
Programming the System for Monitoring.
a. Set the Controller’s Slider Switch to RUN
b. Pick up your telephone’s handset.
c. Call l-800-675-3082 to be connected with the central monitoring station.
d. the programming instructions provided by a Customer Support Representative.
!.
Testing the System.
a. Make sure the Controller’s Slider Switch is set to RUN
b. Call l-800-675-3082 to notify an Alarm Monitoring Agent that you will be testing the system.
c. Press ARM HOME. The Central Controller will chime once and the ARM light will come on.
d. Open a secured door or window.
l
The siren will sound.
l
All lights connected to Lamp Units will flash.
l
The system will automatically call the central monitoring station.
l
Wait 30 seconds.
e. Disarm the system.
l
Enter your 3-digit PIN using the Controller’s numbered keypad.
Press the DISARM button.
f. The central monitoring station will call within two minutes to confirm the test.
Call l-800-675-3082 if the central monitoring station has not called within two minutes.
Flashing Record Light
A flashing record light indicates your
Central Controller cannot dial out to
the monitoring station. Connect your
Central Controller to a phone jack and
call l-800-675-3082 for assistance.
SMARTHOME.COM™
1-800-SMART-HOME
949-221-9200
http://www.smarthome.com
Order #7308KIT