background image

4

PRODUCT FEATURES

Compulsory Warning

If the supply cord is damaged it must be replaced by the 
manufacturer or its service agent or a similarly qualified 
person in order to avoid a hazard.

Caution

•  DO NOT OPEN - DO NOT ATTEMPT TO REPAIR, 

DISASSEMBLE OR MODIFY THIS APPLIANCE.

•  DANGEROUS HIGH VOLTAGES EXIST INSIDE THIS 

APPLIANCE.

•  THIS APPLIANCE IS ONLY TO BE SERVICED BY A 

QUALIFIED PERSON.

•  NO USER-SERVICEABLE PARTS INSIDE.

Specifications

Thank you very much for your purchase of this product.

To enjoy your set to the full from the very beginning, 
read this manual carefully and keep it handy for ready 
reference.

Installation

Locate the receiver in the room where direct light does 
not strike the screen. Total darkness or a reflection on 
the picture screen can cause eyestrain. Soft and indirect 
lighting is recommended for comfortable viewing. 
Allow enough space between the receiver and the wall 
to permit proper ventilation. Avoid excessively warm 
locations to prevent possible damage to the cabinet 
or premature component failure. This TV receiver can 
be connected to 240 Voltage, 50Hz AC only. Never 
connect to DC supply or any other power supply. Do 
not install the receiver in a location near heat sources 
such as radiator, air ducts, direct sunlight, or in a closed 
compartment and or area.

5368 MTV-34-68 CTV U&C Update.indd

12/9/2002, 4:42 PM

4

Summary of Contents for MTV-34, MTV-51, MTV-68

















Reviews: