Hookups (cont’d) 13
Connecting to a TV and a two-channel Stereo
(Stereo has Dolby Pro Logic or right/left Audio In jacks)
Back of TV
(example only)
LEFT AUDIO IN
RIGHT AUDIO IN
1
Stereo
(example only)
VIDEO IN
2
VIDEO IN
3
1
Connect the supplied video cable to the yellow VIDEO
(VIDEO OUT) jack of the DVD Player and to the TV’s
VIDEO IN jack.
2
Connect the supplied audio cable to the red and white
AUDIO OUT (left and right) jacks on the DVD Player and
to the left/right AUDIO IN jacks on the Stereo.
Match the
cable colors to the jack colors.
3
Plug the power cords of the DVD Player, Stereo, and the TV
into an active power outlet. Press the POWER ON/OFF
button on the front of the DVD Player to turn on the DVD
Player.
4
Turn on the Stereo power and set your Stereo to the
correct Audio In channel or sound source.
Refer to the Stereo
owner’s manual for details.
5
Turn on the TV power. Set the TV to the correct Video In
channel.
See your TV owner’s manual for details. Or, change
channels at the TV until you see the DVD screen saver on the TV.
• If you prefer or need to use the
S-VIDEO or Y C
B
C
R
jacks
instead, see pages 11-12.You
only need one video connection
between the TV and the DVD
Player.
Helpful Hint
MDV450 25/09/2002 9:46 AM Page 13
