English
26
DVD Menu Options
(continued)
TIPS:
The underlined option is the factory default setting.
Press
to go back to previous menu item. Press
SETUP
to exit the menu item.
Using the Audio setup menu
A
In disc mode, press
SETUP
.
B
Press select {
AUDIO SETUP
}.
AUDIO SETUP
DIGITAL OUT
DOWN SAMPLE
DOWNMIX
EXIT SETUP
Digital Out
The options included in ‘Digital Out’
are: {ALL}, {PCM}.
A
In ‘Audio Setup’, press
to highlight
{
DIGITAL OUT
}, then press .
{
ALL
}
Select this if the connected device has a
built-in multichannel decoder that
supports one of the multichannel audio
format (Dolby Digital, MPEG-2).
{
PCM
}
Select this if the connected device is not
capable of decoding multichannel audio.
The DVD player will convert the Dolby
Digital and MPEG-2 multichannel signals
to PCM (Pulse Code Modulation).
B
Press
to select a setting, then press
OK
to confi rm your selection.
Down Sample
You can enable and disable the digital
signal for better sound output quality.
A
In ‘Audio Setup’, press
to highlight
{
DOWN SAMPLE
}, then press .
{
48K
}
Playback a disc recorded at the sampling
rate of 48kHz.
{
96K
}
Playback a disc recorded at the sampling
rate of 96kHz. This rate can only be
achieved in Stereo-Classic (Flat) mode.
B
Press
to select a setting, then press
OK
to confi rm your selection.
Downmix
This option allows you to set the stereo
analog output of your DVD Player.
A
In ‘Audio Setup’, press
to highlight
{
DOWNMIX
}, then press .
{
LT/RT
}
Select this option if your DVD Player is
connected to a Dolby decoder.
{
STEREO
}
Select this to change channel output to
stereo which delivers sound from only the
two front speakers.
{
VSURR
}
Allows the DVD player to use virtual
surround sound effects.
B
Press
to select a setting, then press
OK
to confi rm your selection.
01-32 MDV435_436_56_eng.indd 26
01-32 MDV435_436_56_eng.indd 26
2006-04-28 2:33:56 PM
2006-04-28 2:33:56 PM
