12 Hookups (cont’d)
Connecting to a TV and a Stereo
TV has Component Video In Jacks
R
L
AUDIO OUT
VIDEO
OUT
Cb
S-VIDEO
OUT
Y
Cr
COMPONENT
VIDEO OUT
VIDEO
L/MONO
AUDIO
R
in
1
AUDIO (RIGHT) IN
AUDIO (LEFT) IN
Y
Cb/B-Y
Cr/R-Y
COMPONENT
VIDEO IN
DIGITAL AUDIO OUT
PCM / MULTICHANNEL
COAXIAL
DVD Player
Back of Stereo
(example only)
Back of TV
(example only)
1
Connect the supplied red and white audio cables to the red and white
AUDIO OUT jacks on the DVD Player and to the red and white
AUDIO IN jacks on the Stereo, matching the cable colors to the jack
colors.
You can use the Digital Audio Out Coaxial connection instead if your Stereo
has a Coaxial In jack. Details are on pages 11 and 13. Remember, you only need
one audio connection.
2
Connect component video cables (not supplied) to the COMPO-
NENT VIDEO OUT jacks on the DVD Player and to the COMPO-
NENT VIDEO IN jacks on the TV.
3
Plug in the Stereo’s power cord. Turn on the Stereo and select the
Stereo’s Auxiliary IN station. During Disc playback, you will adjust the vol-
ume at your Stereo. See your Stereo owner’s manual for details.
4
Plug in the TV’s power cord. Turn on the TV and set it to the
Component Video In channel, which may be near channel 00. During
Audio CD playback, you may check the status of Audio CDs on your TV
screen. During DVD playback, you will watch the program on the TV. See your
TV owner’s manual for details.
5
Connect the DVD Player’s power cord to a power outlet.
Press the POWER
y
y
button to turn on the DVD Player.
You should see the DVD logo on the TV screen. If you do not, check your con-
nections and make sure the TV is on the correct Component Video In channel.
2
1
MDV435 4/12/02 11:55 AM Page 12
