28
EN
EN
INITIAL SETTING
You need to follow these steps when you turn on this unit for the first time.
1
Follow the procedure in “Finding the
Viewing Channel on Your TV” on
page 22 to display “Initial Setup”
menu.
2
Use [
K
/
L
] to select your desired
language, then press [OK].
Initial Setup
Language
English
Français
Español
3
Use [
K
/
L
] to select the type of
broadcasting signal, then press [OK].
Initial Setup
Auto Preset will scan all terrestrial channels.
This may take a while to complete.
Channel Preset
Make sure the antenna is
connected to “ANTENNA IN” jack.
Antenna
Cable (Analog)
Cable (Analog / Digital)
The unit will start getting channels available in
your area.
Antenna:
(When using antenna)
The channels broadcasted in analog TV and
digital TV are automatically scanned and
memorized. Only the receivable channels in the
area will be memorized.
Cable (Analog):
(When using basic cable)
The channels broadcasted in analog Cable TV
are automatically scanned and memorized.
Cable (Analog / Digital):
(When using basic cable)
The channels broadcasted in analog Cable TV
and digital Cable TV are automatically scanned
and memorized.
Auto Presetting Now
CH 1
4
If a PBS (public broadcasting station) is available
in your area, clock setting may automatically be
performed and the correct clock will be displayed
following the channel preset procedure.
Initial setting is then complete.
Press
[RETURN]
to exit.
If a PBS (public broadcasting station) is not
available in your area, press
[OK]
. Then proceed
to step 5 in “Manual Clock Setting” on page 34.
E2S02UD̲MDR515H̲F7̲EN̲v2.indd 28
E2S02UD̲MDR515H̲F7̲EN̲v2.indd 28
2011/05/10 11:20:49
2011/05/10 11:20:49
