10
1 x Owner’s Manual
1 x AC Power Cord
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE
TROUBLESHOOTING
GENERAL SPECIFICATIONS
ACCESSORIES
Power Source:
AC 120 V~; 60 Hz; 14 W, Or
DC 9 V; 6 x “C” size batteries (Not included)
BT Version:
2.1
Radio Frequency:
Disc Compatible:
Impedance of Speakers:
Audio power:
AM: 5
- 1710 kHz
FM: 87.5 - 108 MHz
CD; CD-R; CD-RW
[:ȍ
1 W per Channel (Total 2W, RMS)
Check the following before requesting service:
SYMPTOM
POSSIBLE CAUSE
POSSIBLE SOLUTION
No power
AC Power cord had not connected
Connect the AC Cord to the rear of unit and any
wall outlet having AC 120V~; 60Hz
Cannot use battery power
The batteries was drained
Replace by new batteries
The AC Cord was inserted into the AC IN Jack Disconnect the AC Cord from the AC IN Jack
No sound or sound weak
Volume of the unit was set to minimum
position
Increase the volume level by turning the
VOLUME Control Knob clockwise
Volume level of paired/connected external
Audio Player is in low level
Rise the volume level of the paired/connected
external Audio Player
Sound distortion
Volume level too high
Reduce the volume level by turning the
VOLUME Control Knob counterclockwise
Volume level of the paired/connected external
Audio Player too high
Reduce the volume level of the paired/connected
external Audio Player
CD not functioning
Audio Connection Cable was
inserted into the AUX IN Jack
Disconnect the cable from AUX IN Jack
Disc is dirty or scratched
Try other discs
CD disc incorrect install
Place the CD disc on the center spindle with
printed side face up
BT not functioning
Audio Connection Cable was
inserted into the AUX IN Jack
Disconnect the cable from AUX IN Jack
The external BT Device had NOT paired to the
unit
Pair the external BT Device to the unit
as pag
H
The external BT Device too far from the unit
Place the external BT Device close to the unit
