background image

FCC Statement   

Warning: Changes or modifications to this unit not expressly approved by the party 

responsible   

for compliance could void the user’s authority to operate the equipment. 
 

NOTE: This equipment has been tested and found to comply with the limits for a 

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed 

to provide reasonable protection against harmful interference in a residential 

installation. This equipment generates, uses and can radiate radio frequency energy 

and, if not installed and used in accordance with the instructions, may cause harmful 

interference to radio communications. 

 

However, there is no guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off and on, the user is 

encouraged to try to correct the interference by one or more of the 

following measures: 

 

Reorient or relocate the receiving antenna. 

 

Increase the separation between the equipment and receiver. 

 

Connect the equipment into an outlet on a circuit different from that to which 

the receiver is connected. 

 

Consult the dealer or an experienced radio/TV technician for help 

 

The device must not be co-located or operating in conjunction with any other 

antenna or transmitter. 

 

This device complies with Part 15 of the FCC Rules. Operation is subject to the 

following two conditions : (1) this device may not cause harmful interference, and (2) 

this device must accept any interference received, including interference that may 

cause undesired operation. 

 
 
 
 
 
 
 

Summary of Contents for MCH3349












Reviews: