4 Use your TV
Switching on your TV and putting it in Standby
mode
Remote Control
55ME314V / 50ME314V / 40ME314V /
40ME324V / 32ME304V / 28ME304V
39ME313V/F7 A
TV
TV
To Turn the TV On from Standby or Off to Standby
●
Press
B
on the Side or Front panel or the Remote Control.
Note(s)
●
Energy Consumption contributes to air and water pollution. When the AC Power Cord
is plugged in, your TV consumes energy with a very low standby Power Consumption.
Adjusting Volume
55” - 39”
32” - 28”
55ME314V / 50ME314V / 40ME314V /
40ME324V / 32ME304V / 28ME304V
39ME313V/F7 A
Remote Control
TV
TV
To decrease or increase Volume
●
Press
VOL
J
/
K
on the Front panel or press
VOL + / –
on the Remote
Control or the Side panel.
VOL
J
(-) : Volume Down
VOL
K
(+) : Volume Up
To mute or unmute sound
●
Press
D
on the Remote Control to mute the sound.
●
Press
D
again or
VOL + / –
to recover the original sound.
Switching Channels
55” - 39”
32” - 28”
55ME314V / 50ME314V / 40ME314V /
40ME324V / 32ME304V / 28ME304V
39ME313V/F7 A
TV
Remote Control
TV
To select Channels by using CH
I
/
H
or CH + / –
●
Press
CH
I
(Down) /
H
(Up) on the Front panel or press
CH + / –
on the Remote Control or the Side panel.
To select Channels by using the NUMBER keys
Digital TV Operation
●
For Digital channels, press a number followed by a dot “
•
” and the
corresponding sub channel number.
–
When selecting Digital channel 11.1
Be sure to press
•
before entering the subchannel number.
Cable / NTSC (Analog) TV Operation
–
When selecting Cable or Analog channel 11
Press
PREV.CH
to return to the previously viewed channel.
Note(s)
●
To select the non-memorized channels, use
the NUMBER keys
.
●
No signal
will appear on the TV screen after the subchannel broadcast is over.
●
Audio only program
message will appear on the TV screen, when you receive only a
sound signal.
17
.
English
