18
GB
Harmonic distortion:
Mono
<0.40%
Stereo
<0.75%
AM tuner
Frequency response:
531-1602 MHz
Signal to noise ratio:
40 dB
Miscellaneous
Compatible disc formats:
CD, CD-R, CD-RW
Mains voltage:
230 VAC/50 Hz
Power input:
Maximum 150 W
Standby 0.35 W
Dimensions (w x h x d):
Main device:
340 x 99 x 305 mm
Main device incl. operational
elements/connecting terminals:
340 x 99 x 340 mm
Remote control:
50 x 122 x 12 mm
Weight:
8.2 kg
SpeAKerS
Subject to technical change.
Configuration:
2 way bass reflex
Power Handling RMS/max:
80 / 140 W
Impedance:
4 – 8 Ohm
Frequency Response:
35 – 35 000 Hz
Efficiency (1 W/1 m):
90 dB
Dimensions (w x h x d):
182 x 270 x 255 mm
Subwoofer
Use a RCA cable to connect the subwoofer output of the
MC 2 S
to the LEF input of the
subwoofer. For 2-line subwoofer inputs, it’s best to use a Y-RCA cable. Also observe the
operating instructions for the subwoofer.
line in (front panel)
This is used for connecting an audio source with a 3.5 mm stereo jack.
AuX 1 and AuX 2
Two analogue connections on the rear of the
MC 2 S
are designed for RCA cables.
If you should have any further queries, please refer to the operating instructions for the
respective device.
CD reCeIVer
Amplifier
Power output:
Rated power
4 ohm
2 x 40 w
8 ohm
2 x 30 w
Pulse power
4 ohm
2 x 100 w
Frequency response:
CD/AUX/LINE
15 Hz – 90 kHz (-3.0 dB)
25 Hz – 45 kHz (-1.0 dB)
Signal to noise ratio:
CD/AUX/LINE
90dB
Input sensitivity/impedance:
AUX/LINE
400 mV/47 kOhm
Equalisation:
Bass
±10 dB/100 Hz
Treble
±10 dB/ 10 kHz
FM tuner
Frequency response:
87.5 – 108 MHz
Signal to noise ratio:
Mono
70 dB
Stereo
65 dB
SpeCIFICAtIoNS
SpeCIFICAtIoNS
FuNCtIoNS oF tHe MC 2 S