Magnani MI-HA-MXH01-B Series, User Manual

Page: 6 / 30

First use
• Remove the device and accessories from the box. Remove any stickers, protective film or plastic from the
device.
• Before you use the device for the first time, clean the device with a damp cloth.
• Clean the dough hooks and whisks in warm water and washing-up liquid.
• Thoroughly dry the device, dough hooks and whisks.
• Never use aggressive or abrasive cleaning materials, a scouring sponge or steel wool; these damage the
device.
• Make sure that the speed control switch
4
is set to the 0 position.
• Before connecting the device to the mains power, insert the dough hooks
7
or whisks
8
in the apertures
2
until they lock in place. The hook with washer must be inserted into the larger aperture.
• Connect the device to the mains power.
• NOTE!
When using the device for the first time, a slight odour might occur, this is normal. The odour will
disappear after a few minutes. Ensure adequate ventilation.
Power ON/OFF
• When the device is connected to the mains power, make sure that the speed control switch
4
is set to the 0
position.
• Switch on the device by setting the speed control switch
4
to position 1 to 5.
• The device can be set to 5 different speeds using the speed control switch
4 . Speed 1 is the lowest speed,
speed 5 is the highest.
• The device is equipped with a turbo knob
5
. The turbo allows you to set the highest available speed while
exerting pressure. The turbo only works when the speed is set to the minimum position
1
.
• Switch the device off by setting the speed control switch
4
to the 0 position.
• Then remove the power plug from the mains power.
Using the device
• Before each use, make sure the device is clean and dry.
• When mixing, place the bowl on a flat, stable surface, in a place where it cannot fall over.
• The device is suitable for stirring, beating and mixing soft foods and liquids.
• WARNING! Before installing, releasing or changing the dough hooks or whisks of the device,
make sure that the speed control switch is in the 0 position, the rotating parts have reached standstill,
and the power plug has been removed from the mains power!
• Before connecting the device to the mains power, insert the dough hooks
7
or whisks
8
in the apertures
2
until they lock in place.
• Release the dough hooks
7
or whisks
8
from the device apertures
2
by pressing the eject button
3
.
• Use the dough hooks to blend light/medium dough. Only use speed setting 1, 2 or 3 of the speed control when
using the dough hooks (see table below).
• Use the whisks to blend flour, dry ingredients, butter, eggs and liquids (see table below). When using the
whisks, speed settings 1 to 5 can be used. The turbo knob
5
can also be used and allows you to blend at the
highest available speed while exerting pressure.
• Always switch off the device before removing the dough hooks or whisks from the bowl.
Settings Examples to prepare mixtures Whisks / hooks
Speed 1
For blending in flour or dry ingredients and liquids for batters and light dough
Whisks
For blending in flour or dry ingredients for firm dough
For stirring nuts, chips, raisins into light / medium (cookie) dough, such as
oatmeal and chocolate chip
Dough hooks
Speed 2
For mixing thin batters, such as for muffins, waffles, pancakes and quick
breads
For preparing sauces, puddings
Whisks
For kneading light pastry dough Dough hooks
Speed 3
For creaming butter and sugar
For beating eggs into batters
For preparing cake mixes (specifying medium speed)
For mixing cake batters and frostings Whisks
For beating eggs into (cookie) dough
For kneading medium pastry dough Dough hooks
EN 04