EN 02
• Make sure that the device and power cable do not come into contact with heat sources, like a hot hob or
naked flame.
• The device must be able to dispel its heat in order to prevent the risk of fire. So make sure the device has
sufficient free space around it (at least 10 cm from all sides) and do not place the device in contact with
combustible materials and/or on or near combustible materials.
• WARNING!
Do not cover the device to prevent overheating and potential fire hazards.
• Check the power cord regularly for damage.
• Never use the device if the power cord shows signs of damage, if the device has fallen on the ground or
shows any other signs of damage.
• Switch OFF the device and remove the power plug if you discover any faults during use, find any signs of
damage, are not using the device or are cleaning it.
• Make sure the power cord cannot be trodden on or pinched.
• Do not allow the power cord to hang over sharp edges and keep it away from hot objects and naked flames.
• When plugging in the power plug, make sure people cannot accidentally pull it out or trip over it.
• Remove the power plug from the power socket during lightning storms or if unused for long periods of time.
• Use a 10 amp cable if an extension cable is required. Cables with a lower amp rating may burn out.
• When using an extension cable, make sure it is completely extended.
• WARNING!
To reduce the risk of fire or electric shock, protect the device from dripping or splashing
water and keep away from objects filled with liquids, such as vases. Such objects should not be placed on or
near the device.
Use
• Do not use the device in the vicinity of flammable materials.
• Do not leave the device unattended when it is in use.
• Do not touch the waterspout or the water being dispensed when operating the device.
• When operating, do not touch or block the steam outlet by hand or any other means.
• Do not open the water tank lid in a rush, in order to avoid burns resulting from hot steam or any possible
malfunctions.
• Do not use hands or any other body parts to feel the temperature or the steam of the device while it is
being operated.
• Do not use the device to heat anything other than water.
• Do not fill the water tank of the device above the “MAX” indicator.
• Do not operate the device if the water level is below “MIN”
• Do not operate the device without water, or when the water is below the minimum water level, to avoid
damaging the heating element.
• Place the device on a flat and stable surface, in a place where it cannot fall over or suddenly be knocked over,
resulting in burns.
• Do not lean on the device.
• Do not operate the device upside down.
• Do not put the device into a working disinfection cabinet.
• Do not use the device in the refrigerator or freezer.
• Never move the device when it is switched ON or still warm. First switch OFF the device and only move it
when it has cooled down.
• Clean the device thoroughly after use (see “cleaning and maintenance”).
• Avoid locations subject to vibrations, cold or humidity.
• Do not expose the device to direct sunlight, heat sources, excessive humidity or corrosive environments.
• Do not place the device under any mechanical stress.
• Improper use of the device could damage the product.
• Please handle the device carefully. Impacts or falls, even from a low height, can damage the device.
• Do not open the casing as this may result in electric shock.
• Do not attempt to disassemble or repair the device or modify it in any manner.
• The device must be serviced if it has been damaged in any way, i.e. if the power supply cord/plug is damaged;
objects have fallen into it; it has been exposed to rain or moisture; it has been dropped or does not operate
properly.
• Do not use abrasive cleaning solvents to clean the device.
• Do not use foreign objects to clean the device.
Summary of Contents for MI-HA-IHWD01-B
Page 1: ...USER MANUAL Model MI HA IHWD01 B...
Page 2: ......
Page 31: ......
Page 32: ...Version 2020 07 23...