13
MAGNAMED
Ventilator Analyzer -
VentMeter
P/N: 1901509
– Rev 05
The power supply unit is an AC/DC
Converter that can be connected to an
electrical power source as shown in the
figure.
Tension
1
2
3
110V
AC
NEUTRAL
PHASE
GROUND
220V
AC
PHASE
PHASE
GROUND
Figure - socket pattern NBR 14136
Notes
•
Plug and Socket Standard: ABNT NBR-14136 -
Plugues e tomadas para uso doméstico e
análogo até 20 A/250 V em corrente alternada - Padronização
”
The internal battery of the Ventilator Analyzer
– should be always charged and ready to use in eventual
electrical power failure, to achieve it this cable should be kept connected to the mains. This carries out battery
charging even if the VentMeter is turned off.
After long use of the Ventilator Analyzer in battery operated mode it is advisable that a complete recharging
cycle be done preparing it to the next use.
Caution
•
If the Ventilator Analyzer -
VentMeter
remains disconnected from the electrical power
supply for a period greater than one month, it is recommended to recharge it before use.
1 3 2
