7
coNteNts
1
introduction
1
2
system components
2
2.1
Sensor housing
2
2.2
Meter housing
2
2.3
Buttons
3
2.4
Batteries
4
3
Display
5
3.1
Measurement display
5
3.2
Main menu
6
3.3
About screen
6
3.4
Brightness
6
3.5
Power Off time
7
3.6
Time/date
7
3.7
Set units
7
3.5 Power oFF time
The POWER OFF TIME menu option allows you to set
an automatic timer to power the meter down, in order
to conserve battery power. The power off timer may be
set between 0 and 15 minutes. If the power off time is
set at 0, the meter will never turn itself off. If the time
is set outside the required range, an ‘ERROR IN TIME’
message will be displayed.
Error message
3.6 time/Date
The SET TIME/DATE menu option allows you to change
the time and date settings.
to set the time:
Select the TIME ONLY option from the menu; ‘ENTER
CURRENT TIME’ will display. Increase or decrease the
time using the up and down arrow buttons. Use the left
and right arrow buttons to move between digits, then
use the accept button to complete.
to set the date:
Select the DATE ONLY option; ‘ENTER CURRENT
DATE’ will display. Increase or decrease the date using
the up and down arrow buttons. Use the left and right
arrow buttons to move between digits, then use the
accept button to complete.
Set time/date
3.7 set UNits
white light lux Units
Select ‘
wl - lux
’ from the menu to set the unit to Lux
white light Foot candles
Select ‘
wl-Foot candles
’ to set the unit to ft-c
UV light micro watt
Select ‘
UV - µw/cm2
’ to set the unit to µW
UV light milli watt
Select ‘
UV - mw/cm2
’ to set the unit to mW
Set Units
