BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 62 of 93
For reconnecting you have to change your computers IP address to
192.168.1.80
. Then type in
your browser the new IP address of the network camera, to access the configuration again.
The first camera connected to the Video Encoder AXIS Q7404 is now configured. If more than
one camera should be connected, the same changes for all connected cameras have to be
done. Use the specified IP address in the following table for its respective camera.
Camera 2
Camera 3
Camera 4
IP address
192.168.1.91
192.168.1.92
192.168.1.93
Subnet mask
255.255.255.0
255.255.255.0
255.255.255.0
Note:
Finally, change your PCs or laptops IP configuration back to dynamic configuration.
