BLUEPIRAT SERIES | CAMERA USER GUIDE/
page 14 of 93
Set IP address to
192.168.1.90
and set date and time manually
Figure 5.5 Defining the IP address and setting the date and time
Comment:
The time set here is initially only a temporary adjustment. In our system the data logger is the
time master and overwrites the logger time after successfully synchronizing with the video
server.
Attention:
Before you start recording always set the date and time in the data logger first.
It is impossible to change the timestamp at recorded video data. This means, the setup of a new
logger time before downloading does not change the time within the video pictures. In this case,
the timestamps of the other channels and the video picture timestamp could not match.
Click on [next].
Hint:
If you change the IP address, you will lose the connection to the network camera.
To connect to the Main Unit again, change the IP address to
192.168.1.80
in the [Internet Proto-
col Version 4 (TCP/IPv4) Properties] window of your computer.
