Monostick 150i
EN
www.magmaweld.com
10
USER MANUAL | MANUAL DO UTILIZADOR | KULLANIM KILAVUZU
Technical Information
TECHNICAL INFORMATION
1.1 General Information
Figure 1: Monostick 150i
1-
Power Switch
5-
Earth Cable and Welding Cable Socket (-)
2-
Power LED
6-
Earth Cable and Welding Cable Socket (+)
3-
Thermic / Error LED
7-
Line Cable Inlet
4-
Current Adjustment Knob
8-
Handle
1.2 Machine Components
Monostick 150i is an inverter type portable, mono-phase DC MMA welding machine designed to weld stick electrodes up to 3.25 mm. This unit can also
be used as a DC TIG* power source for touch-start applications.
Even though the machine is mono-phase, due to the inverter technology it provides stable arc and good restriking performance, also the electric
consumption is approximately 10% less than the silicon controlled rectifier equipments and 25% less than the magnetically controlled equipments.
Monostick 150i proved well that it can work between 185 to 250 V 50/60 Hz line voltages. Therefore this machine is quite immune to mains voltage
fluctuations and perfectly welds with generator-sets.
Monostick 150i can also be used with long welding cables up to 25 mt.
The machine is fan cooled and thermally protected against over heating.
