Magmaweld ID 400 MW, User Manual

Page: 29 / 172

29
www.magmaweld.com USER MANUAL | MANUEL D’UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
SMART SERIES / SMART SERİSİ
EN
2
A
1
B
Remote Control Torch Socket
Front View
TORCH CONTROL - BROWN
TORCH CONTROL - BLACK
TORCH CONTROL - RED
TORCH CONTROL - WHITE
TORCH CONTROL - GREEN
Mode
Classic Mode
Smart Mode
Synergic Mode
You can reduce your wire speed to the minimum tolerance value (-10%).
Setting Range :
0.5 m/min
You can reduce your welding current to the minimum tolerance value (-10%).
Setting Range :
5 A
You can reduce your welding current to the minimum tolerance value (-10%).
Setting Range :
5 A
You can increase your welding voltage up to the maximum tolerance value (+10%).
Setting Range :
0.5 V
You can increase your wire speed up to the maximum tolerance value (+10%).
Setting Range :
0.5 m/min
You can increase your welding current up to the maximum tolerance value (+10%).
Setting Range :
5 A
You can increase your welding current up to the maximum tolerance value (+10%).
Setting Range :
5 A
You can increase your welding voltage up to the maximum tolerance value (+ 10%).
Setting Range :
0.5 V
You can increase your welding voltage up to the maximum tolerance value (+10%).
Setting Range :
0.5 V
You can reduce your welding voltage up to the minimum tolerance value (-10).
Setting Range :
0.5 V
You can reduce your welding voltage to the minimum tolerance value (-10%).
Setting Range :
0.5 V
You can reduce your welding voltage to the minimum tolerance value (-10%).
Setting Range :
0.5 V
1
1
1
2
2
2
A
A
A
B
B
B
Button Position
Operation
3.3 Remote Control
With a torch with suitable properties and a connector, you can also change your welding current (wire speed) /
welding voltage through the torch without going near your machine. Connect the remote control torch socket.
Socket connections are as follows :