Magmaweld ID 350 E PFC, User Manual

Page: 24 / 38

1.2 COMPONENTS OF THE MACHINE
22 ID 350 E PFC
1.1 GENERAL EXPLANATIONS
ID 350 E PFC is an inverter type portable, tri-phase DC MMA welding machine designed to weld stick
electrodes up to
6.0 mm. D ue to descending characteristics of the inverter technology it provides stable arc
and good re-striking performanc e. I nitial striking ability of the electrodes can be improved via Hot Start
potentiometer and certain electrodes like basic electrodes which have tendency to short circuit and stick to the
weld pool could be avoided by adjusting the Arc Force potentiometer.
It can be used as a Touch-Scratch DC TIG* welder i f a TIG torch with a valve is connected .
The electric consumption is approximately 10% less than the silicon controlled rectifier equipments and 25%
less than the magnetically controlled equipments.
ID 350 E PFC can also be used with long welding cables up to 25 m. Plus, wireless and cable remote control
options are possible
.The machine is fan cooled and thermally protected against over heating.
(*) For more information about TIG welding, check page 9.
Figure 1: Front and Back View
Mains Cable Inlet
ON/OFF Switch
Remote Control Connector Inlet
Earth Cable and Welding Cable Socket (+)
Earth Cable and Welding Cable Socket (-)
Handle
Current Adjustment Knob
Current Display
Voltage Display
Welding Mode Selection Button
Hot Start Adjustment Knob
Arc Force Adjustment Knob
1
2
3
4
5
6
7
8
9
10
11
12
TECHNICAL INFORMATION
1. TECHNICAL INFORMATION
ID 250E
Arc Force
1
3
4
5 6
7
8
9
10
2
Rutile
Basic
Cellulosic
Hot Start
1
3
4
5 6
7
8
9
10
2
ID 350E
PFC
2
1
6
12
3
4 5
7
8
9
11
10