Diameter of
Electrode
(mm)
Diameter of
Nozzle
(mm)
Welding
Current
(A
DC
)
Gas Debit
(lt/min)
1.0
1.6
6.3
9.5
15 - 70
30 - 150
6 - 8
6 - 8
Ÿ
Install the Argon gas regulator onto the Argon gas
cylinder.
Ÿ
Connect the gas hose of the torch to the gas
regulator.
Ÿ
TIG torch with a valve should be
used.
Ÿ
Connect the TIG torch power
cable to the negative outlet
(5)
and the earth cable to the
positive outlet
(
4
)
of the
machine.
Figure 5:
Connecting Gas Cylinder
2.5 CONNECTIONS FOR TOUCH-SCRATCH TIG WELDING
25
ID 350 E PFC
2.4 CONNECTIONS FOR MMA WELDING
Figure 3:
MMA Welding Connections
Ÿ
According to the polarity of the electrode to be
used, insert welding cables into the appropriate
outlet
(4 and 5)
and tighten them by turning clock-
wise.
Ÿ
Connect the earth clamp tightly to the workpiece
as close as possible to the welding area.
Figure 4:
TIG Welding Connections
INSTALLATION
Summary of Contents for ID 350 E PFC
