Magmaweld ID 250E, User Manual

Page: 18 / 76

18 ID 250E
EN
www.magmaweld.com USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
• Welding current is adjusted between 5 - 250 A in all welding modes by turning the current adjustment pot
to the right and left.
• The adjusted value is monitored on the digital display.
• By pressing the current adjustment button, you can switch between current and voltage values during
welding or when idle.
7-) CURRENT ADJUSTMENT POT
6-) HOT START SETTING
When electrode welding is started, high current is supplied for 1 second up to two times the welding current
set with the Hot Start function to ignite the electrode more easily. The “Hot Start” value set at the time of the
initial welding will be added to the main current as much as the percentage of the main current.
For example ;
if the main current is 150 A and the Hot start is set to 100%, the current of the machine will not
be 300A and the maximum current of the machine will be 250 A. The output current will return to the set current
at the end of “Hot Start” period and easy ignition is provided.
Current
Hot Start Current
Hot Start Time
Set Current
Time
5-) ARC FORCE SETTING
Current
Welding Current
Welding Voltage
Sticking Condition
Time
Arc Force increases the welding current and prevents arc interruption based on the welding voltage if the
welded electrode has a tendency to adhere. It is set between 0-100% with the help of the pot. The set value
cannot exceed the maximum current of the machine.
For example ;
If the main current is 150 A and the Arc force is set to 100%, the current of the machine will not
be 300A and the maximum current of the machine will be 250 A.
Operation