Magmaweld ID 250E, User Manual

Page: 17 / 76

17 ID 250E
EN
www.magmaweld.com USER MANUAL | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
• The SPOT mode is selected by using the menu button, the relevant led will light when this mode is selected.
• Developed for who work with short welding seams.
• This mode should be selected when shorter welding length is desired.
• Used for selecting one of MMA-SPOT welding modes. Press the button once to switch to the other welding
mode. The led of the selected mode will be lit.
• MMA mode is selected by using the Menu button and the relevant led will light when this mode is selected.
• MMA mode should be selected when welding of rutile or basic electrodes is desired.
2-) SPOT MODE
3-) WELDING MODE SELECTION KEY
4-) MMA MODE
1-) DIGITAL DISPLAY
• Welding current, welding voltage and other parameters can be monitored.
4
5 6 7
3 2 1
3.1 User Interface
OPERATION
Operation