Magmaweld GL 451, User Manual

Page: 11 / 44

11
www.magmaweld.com USER MANUAL | KULLANIM KILAVUZU
GL 451 / GL 600
EN
1 2 3
4
5
6
4
6
7
1-
Power Switch
5-
Current Adjustment Indicator
2-
Lifting Eye
6-
Wheel
3-
Current Adjustment Lever
7-
Welding Cable Sockets (+ and -)
4-
Handle
TECHNICAL INFORMATION
1.1 General Information
GL 451 / GL 600 is a moving magnetic-core type welding machine, designed to weld all type of coated
electrodes from 2.0 to 6.0 mm. It has excellent welding performance with cellulosic electrodes and carbon
gauging, for GL 451 up to 8.0 mm, for GL 600 up to 10 mm is possible. The equipment is very easy to use,
current adjustment is made by just turning the lever on top of the machine clockwise or counter clockwise
and adjusted value of the current is observed by the scale in front of the machine. Although it is not an
electrically efficent machine, due to its very simple concept, its down time and operation costs are very
low. Since there is no electronics involved, the machine can perform great at dusty, humid, corrosive, very
hot and very cold environments. With its telescopic arms and big wheels it can be pulled easily across the
working area especially at outdoor welding sites. The machine is fan cooled and thermally protected against
overheating and phase failures.
Figure 1 : GL 600
1.2 Machine Components
Technical Information