A
- Lift radiant plate up & out of left slot.
B
- Remove by sliding it out of right slot.
C
- Remove burner retainer pin (see C) & remove burner. Inspect burner, remove
any obstructions. CAUTION: WHEN REPLACING BURNER, CUT SLOTS IN BURNER
MUST FACE DOWN.
D
- Lift the two-section liner out of outer shell by lifting up on the burner support
bracket on the left liner section.
(1)
Slide the left section partially over the right
section.
(2)
Grab the back of the left liner section and pull it toward you until it
clears the lip of the outer shell.
(3)
Lift liner section out of grill.
E
- Move the right liner section slightly to the left
(1)
. Grab the back of this section
and pull it toward you
(2) -
lift and remove this section
(3)
.
• Inspect burner, remove any obstructions.
• Clean as indicated in Maintenance (page 7).
• To re-assemble, reverse the procedure above.
DISASSEMBLY & RE-ASSEMBLY
B
C
E
1
2
D
2
1
3
3
Burner
support
bracket
A
Retainer Pin
Retainer Pin
Burner
Left
Side
Slot
Right
Side Slot
Radiant Plate
6
