See Magma website
for replacement part numbers
and valve applications.
MagmaProducts.com
CONTROL VALVE REGULATOR
•Uses standard 1 lb. disposable propane canisters (DOT-39 NRC).
•Prior to installing valve, become familiar with the valve function & graphics on valve
knob. Never force the knob. Always turn or push gently.
•Turn control valve to “lock” and install gas canister being careful not to cross the
threads. Check for leaks prior to use, by brushing soapy water solution around threads
and orifice hole checking for bubbles.
•Position valve with gas bottle as shown
(A)
. Gently insert valve stem into valve
chamber. Rotate until valve stem key aligns with lock detent allowing valve to fully
insert. Rotate gas canister down, so knob faces you
(B)
or straight up
(C)
depending
on application. Pull straight out on valve to check that it is locked in place.
Valve will feel loose and will rotate easily. Even though the valve feels loose, it is designed that way and will not
leak. The valve was designed to be loose fitting in order to allow safe, easy installation and removal of the
propane canister and so it easily swings without resistance to fit all applications.
ChefsMate™ INSTALLATION INSTRUCTIONS
(For TrailMate™ Installation Instructions, see page 4.)
Burner
Lid Lock
Grill Grates
Lid
Handle
Radiant Plate
Outer Shell
Liner
Match Light
Hole
Mount Support Pad
with Folding Legs
Valve Chamber
Slide Out
Grease Tray
Control Valve
Regulator
Type 1
Low-Output
MOUNT HARDWARE
Fasteners are supplied for both Single Mount &
Dual Mount grill mounting options. See Magma
Catalog or Website for best mount selection.
Dual mount applications
4 Carriage bolts & lock nuts. Only 4 bolts
required for grill mounting. Place bolts (2 per
side) diagonally from each other as shown.
Note: Place washers on carriage bolts as shown.
Single mount through-bolt applications
4 Carriage bolts, washers & lock nuts.
Note: Place washers on carriage bolts as shown.
Hex head
bolt & lock
washer
Carriage bolt,
washer &
lock nut
Single mount non-through-bolt
applications, including Style 1 “Levelock”
4 Hex head bolts & lock washers.
Note: Place lock washers on hex bolts as shown.
3
