Magio MG-585, Instruction Manual

Page: 26 / 28

24
Be sure to add a few drops of oil to the blades before running.
Don’t forget to tighten the screws after the blades have been
aligned.
Do not immerse the body of the appliance in any liquid, rinse it
under running water or place it in the dishwasher.
Never use sharp or abrasive items when cleaning the
appliance.
3. Lift off the small moving blade and replace it with the new one on
the plastic oscillator (pic. 3).
4. Replace the fixed blade using the screws and lightly tighten them.
Adjust the teeth (pic. 4), to a gap of 0,5-1 mm and the small, moving
blade as centered and parallel as possible to the fixed blade’s teeth.
Cleaning and maintenance
To maintain optimum performance, the appliance should be
cleaned after each use.
1. Blow away any remaining hair on the blades or use the
cleaning brush provided.
2. Remove the comb guide. The comb guide can be rinsed
under running water. Ensure they are dried thoroughly before
storage or further use.
3. Oil the blades after every use to ensure optimum cutting
performance.
Storage
1. Unplug the unit.
2. Clean it and thoroughly dry the unit before taking the unit for
storage.
3. Wind the power cord.
4. Keep the unit in a dry cool place out of reach of children and
disabled persons.
Technical specifications
Battery type: 2000mAh Lithium battery
Charger:
Input: 100–240V ~ 50/60Hz 0.2A
Output: 5VDC, 1000mA, 5W
EN