Magio MG-370, Instruction Manual

Page: 25 / 27

25
EN
Operation
of the arrow on the lock, remove the metal panel. Repeat the
action with the other panel.
3. Slide the latch in the direction of the arrow shown on the latch
and install one of the three types of removable panels (p. 23).
The selected panel is installed in the device so that the
protrusions on it coincide with the grooves in the housing.
Release the latch. Repeat the action with the other panel.
1. Insert the plug into the socket. The red indicator (5) will light
up. Wait until the green indicator (5) lights up.
2. Prepare the ingredients for the sandwiches.
3. For each sandwich you need 2 slices of bread, filling. A small
amount of butter must be placed between the bread slices
and the heating panels.
4. When the green indicator lights up, you can put all the
ingredients for making a sandwich on the heating panels (1).
5. Slowly and gently press the top heating panel to the bottom
heating panel so that they close tightly.
6. Open the sandwich maker after 2-6 minutes. Sandwiches
are ready. Sandwich preparation time depends on the type
of sandwich, ingredients and your taste.
7. Use wooden tools (such as a spatula) to get sandwiches from
the sandwich maker.
8. If you want to make more sandwiches, wait until the green light
comes on again indicator and put the needed ingredients in
sandwich maker.
Attention! Be sure to push the latch off before installing
the removable panel, do not press it! Installing the panel
with force can lead to breakage of the lock!
Do not replace metal panels when the appliance is
connected to an electrical outlet.
Do not operate the appliance without installed panels.