15
First mark the holes to be drilled (A), by holding the base of the wall fixing against the desired place of
installation. When installing on stone or concrete surfaces use a 6 mm masonry drill. After drilling the
holes insert the supplied wall plugs into the holes so that they are flush with the surface. Next secure
the stand using screws from the assembly kit.
Note that prior to installing the wildlife camera on the wall mounting a memory card or batteries
should be inserted or the power supply should be connected. The camera should also be switched to
Standby mode.
Next place the wildlife camera onto the tripod bolt (B) and partly secure the camera (approx. 3 turns).
Turn the camera to the desired alignment and secure with the counter screws(C).
In order to move the camera into the final position, release the two hinge screws (D) slightly, align the
camera and fix the position by tightening the two hinge screws (D).
Note:
• Prior to drilling check that no supply pipes are concealed in the wall!
