8
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL:SU 100129
PRODUCT CODE: 46456
08/2015
5. Preparation for use
Remove microscope from packaging and place on a straight, stable and clean surface.
Slide microscope unit from the top into the stand holder.
Before you can use the USB Microscope, the software supplied on the program CD
must be installed on your PC.
5.1. Installation of software Ulead VideoStudio 7 SE VCD
Place the supplied program CD containing Ulead VideoStudio 7 SE VCD into the CD
or DVD drive. The CD normally starts up automatically.
Click on menu point “Install Ulead VideoStudio 7“ in the selection menu.
Note:
• First install the Ulead VideoStudio 7 SE VCD software and the device driver. Only then complete the USB
connection between the microscope and the PC.
Note:
• If the CD does not start up automatically, open Windows Explorer and select the drive into which the CD has
been inserted. To start the selection menu double click on “AutoRun.exe“. The installation routine can also
be started by double clicking on the “Setup.exe“ file.
