![background image](http://html.mh-extra.com/html/maginon/rc-200/rc-200_instruction-manual_690984010.webp)
AFTER SALES SUPPORT
AFTER SALES SUPPORT
AUS
1 800 623 432
AUS
1 800 623 432
17
AUS
AUS
16
Use
Power supply
Installation of mirror
Attach the mirror and integrated display to the existing rear
view mirror of your vehicle as follows: Position the bottom
fixture on the rear of the mirror against the bottom of the rear
view mirror. Slide top fixture upwards and push over the top
edge of the rear view mirror. As soon as you let go of the top
fixings, the fixings will clamp around the rear view mirror.
Additionally secure mirror using existing rubber bands.
Power supply
To supply the mirror with power connect it to the USB car
adaptor using the USB cable and plug the adaptor into the
cigarette lighter socket of the vehicle. Once the USB car
adaptor has been plugged into the cigarette lighter socket
and voltage is applied, the red LED of the adaptor lights up.
Note!
When connecting the system to the cigarette
lighter socket, care must be taken to ensure
that the USB cable does not hinder the driver.
Otherwise this may increase the risk of an
accident.