background image

22

23

IRL

UK

Safety

Safety

IRL

UK

 

− Ensure that children do not push objects into the IP secu-

rity camera.

 

− When not using or cleaning the IP security camera or in 

case of a fault, always switch off the IP security camera and 

pull mains connecter out of socket.

WARNING! 
Hazard or children and persons with 
reduced physical, sensory or mental 
abilities (such as partially disabled, 
older persons with limited physical 
and mental abilities) or lack of expe-
rience and know-how (such as older 
children).

 

− This IP security camera may be used by persons with 

reduced physical, sensory or mental abilities or lack of 

experience or know-how provided they are supervised or 

have been instructed on how to safely use the IP security 

camera and understand hazards resulting therefrom. Chil-

dren may not play with the IP security camera. The camera 

may not be cleaned or maintained by children.

 

− Keep children under the age of eight away from the IP 

security camera and the mains cable.

 

− Do not leave IP security camera unintended during ope-

ration.

 

− Keep packaging foil away from children. They could get 

caught in it during play and could suffocate.

Note! 
Danger of material damage!

Incorrect use of the IP security camera can cau-

se the IP security camera to be damaged.

 

− When installing and assembling the IP security camera 

ensure that a 10 cm gap is maintained on all sides in order 

to provide adequate ventilation. Ensure, in particular, 

that ventilation slots are not covered by newspaper, table 

clothes or curtains.

 

− Place IP security camera on an easily accessible, level, dry, 

heat-resistant and sufficiently sturdy work surface. Do not 

place IP security camera at the edge or periphery of the 

work surface. 

 

− Avoid overheating by never positioning the IP security 

camera directly against a wall or underneath mounted 

cupboards. 

 

− Never place IP security camera on or near hot surfaces 

(e.g. stove tops, etc.).

 

− Ensure that mains cable does not come into contact with 

hot parts.

 

− Never expose IP security camera to excessive tempera-

tures (heating, etc.). Never pour liquid into IP security 

camera.

 

− When cleaning, never immerse IP security camera in water 

and do not use steam cleaner. The IP security camera 

could otherwise be damaged.

Summary of Contents for IPC-20C












































Reviews: