![background image](http://html1.mh-extra.com/html/maginon/ipc-100ac/ipc-100ac_operating-instruction_3525819025.webp)
AFTER SALES SUPPORT
AUS
1 800 623 432
31
AUS
Start
Assembling the security camera
Using the supplied wall fixing, install IP security camera at a
fixed location.
NOTE!
Material damage!
Incorrect use of the security camera during assembly can
cause the security camera to be damaged.
− Do not place the IP security camera directly next to
electronic devices as this could produce interference. In
case of picture interference, test the IP security camera at
another location.
− Select the installation site for the IP security camera so that
the lens is not exposed to sun light.
− Hold the plate of the wall fixing containing holes against
the surface of the selected installation site and mark the
holes on the surface, using a pencil.
− To drill suitable holes, use a 6 mm masonry drill for dowels
in stone or concrete surfaces or a 3 mm wood drill for
timber surfaces.
− After drilling the holes insert supplied wall plugs into
holes so that they are flush with the surface.
− Secure wall fixings with supplied bolts.