AFTER SALES SUPPORT
AUS
1 800 623 432
37
AUS
Using the camera
Setting up the live mode
The standard application of the MAGINON WK 3 HD is the
so-called Live mode. When in this mode, photos are either
triggered by movement sensors or at intervals according to
the respective setting.
To set up the Live mode, switch mode switch to ON position.
The red status LED flashes for approx. 5 seconds after which
the camera operates automatically and enters the Standby
mode. As soon as wild animals or other objects directly enter
the detection area of the central sensor zone, the camera
starts to record photos and videos.
Where wild animals enter the detection range of the side
sensors, the sensors detect the movement and activate
the camera. As soon as the wild animals move further into
the detection range of the central sensor zone, the camera
starts to take photos/videos. Where after movement has
been detected by the side sensors no further movement is
detected for five minutes, the camera returns to its Standby
mode.
