![background image](http://html1.mh-extra.com/html/maginon/dlp-1400s/dlp-1400s_user-manual_3528815027.webp)
English
EN-27
Image (Computer Mode)
Option
Actions/Descriptions
Keystone
Adjusts image distortion caused by tilting projection.
(+15 degrees)
Aspect Ratio
Selects this function to fit Auto, 16:9, 4:3 aspect ratio. In
order to use the Auto aspect ratio, the input must be a computer
signal (through VGA cable) of resolution less than SVGA
(800 x 600). If the input signal is a computer signal greater
than SVGA or component 1080i / 720p, only 16:9 or 4:3 aspect
ratio will be available.
Auto: Keep the image with original width-height ratio and
maximize the image to fit native horizontal or vertical pixels.
16:9: The input source will be scaled to fit the width of the
screen.
4:3 : The input source will be scaled to fit the projection screen.
16:9 Image
Press the
e
/
f
buttons to choose the image position showed on
Position
top, center, or bottom.
H. Position
Press the
e
button to move the image left.
(Horizontal Position)
Press the
f
button to move the image right.
V. Position
Press the
e
button to move the image down.
(Vertical Position)
Press the
f
button to move the image up.
Frequency
“Frequency”
changes the display data frequency to match
the frequency of your computer’s graphic card. If you
experience a vertical flickering bar, use this function to make
an adjustment.
Tracking
“Tracking” synchronizes the signal timing of the display with
the graphic card. If you experience an unstable or flickering
image, use this function to correct it.