MAGINON CRB-100, Instruction Manual

Page: 15 / 28

13
AFTER SALES SUPPORT
AUS
1800 623 432 MODEL: CRB-100 PRODUCT CODE: 48144 12/2014
6.2. Basic operation
Tuning the unit On / Off
Press POWER button to turn the unit on. Press and hold again to turn the unit off.
Mode selection
Press the MODE button to cycle through different play modes.
Loudness control
Press the SEL button repeatly until the display shows “LOUD ON” or “LOUD OFF”. Rotate
the VOL button to adjust. When “LOUD ON” shown on the display indicates that loudness
function is on.
Mute control
Press the PWR/MUT button to activate the Mute function. Press the button again to cancel.
Volume
Rotate the VOL button to adjust the volume level. Turn the button clockwise to increase the
volume, and vice versa. The larger the number of volume, the higher the volume level.
Bass
Press the SEL button repeatly until the display shows “BAS 00”. Rotate the VOL button to
adjust. When DSP is ON, bass control is not available.
Treble
Press SEL button repeatly until the display shows “TRE 00”. Rotate the VOL button to adjust.
When DSP is ON, treble control is not available.
Balance
Press SEL button repeatly until the display shows “BAL 00”, then Rotate VOL button to adjust
the balance between the left and right speakers. When “BAL 00” is shown on the screen, it
indicates that the balance is 0.
Fader
Press SEL button repeatly until the display shows “FAD 00”, Rotate the VOL button to adjust
the balance between the front & rear speakers. When “FAD 00” is shown on the screen, it
indicates that the fader is 0.
Preset Equalizer Function
Press SEL button until the display shows “EQ OFF”, then use button to choose the EQ sound
effects. The sequence of equalizer setting will be as follows: CLASS-POP-ROCK-FLAT