manualshive.com logo in svg

MAGINON CRB-100, Instruction Manual

Share
Download
MAGINON CRB-100 Instruction Manual Download Page 10

8

AFTER SALES SUPPORT

AUS

1800 623 432

MODEL: CRB-100 

PRODUCT CODE: 48144 

12/2014

4.  Double check that you marked the first speaker correctly by checking that the speaker 

wires are the same at the head unit.

5.  Repeat this procedure for all of the speakers.

6.  Mark the power, ground, and any other wires also.

5.2. Installation

Note:

•  Important!

 Disconnect negative battery terminal from battery before starting 

installation. Consult the vehicle’s owner’s manual for proper instructions.

•  Mark the polarity of the existing speaker wires before disconnecting battery.
•  Remove the two transport screws from the top of the unit before installing.

1. After removing the old radio 

and mounting sleeve, insert 

supplied mounting sleeve into 

opening.

  

2. Bend the tabs on the 

mounting sleeve to keep the 

mounting sleeve firmly in place.

3. Attach wires from the unit to existing 

wires. See wiring connections diagram. 

Insert radio into dashboard. Then apply 

the trim frame to outside of radio.

 

4. Support radio using supplied 

rear mounting bolt and steel bar. 

See parts list.

DIN front mount

Summary of Contents for CRB-100





























Reviews:

No comments

Brands by name

Popular brands

Load more brands