MAGINON CRB-100, Instruction Manual

Page: 12 / 28

10
AFTER SALES SUPPORT
AUS
1800 623 432 MODEL: CRB-100 PRODUCT CODE: 48144 12/2014
Connector A
1. Rear right speaker (+) / Purple
3. Front right speaker (+) / Grey
5. Front left speaker (+) / White
2. Rear right speaker (-) / Purple-Black
4. Front right speaker (-) / Grey-Black
6. Front left speaker (-) / White-Black
7. Rear left speaker (+) / Green
8. Rear left speaker (-) / Green-Black
Connector B
1. -
2. -
3. -
4. Battery 12V (+) / Yellow
5. Antenna power / Blue-White
6. Panel light / Orange-White
7. ACC+ / Red
8. Ground / Black
Fuse 10A
Fuse 10A
Antenna
socket
RCA OUT
left=white
right=red
ISO-connector
Fuse 10A
OPERATING POWER:
12 VOLTS DC
10A CURRENT
NEGATIVE GROUND
5.3. Wiring connections
Make sure that you have a good chassis ground. Good ground connections will eliminate
most electrical noise problems. A good chassis ground requires a tight connection to the
vehicle’s metal chassis. The area around the ground connection should be clean, bare metal
without rust, paint, plastic, dust, or dirt for a good electrical connection.
Black ground
Connect to vehicle body/chassis. Make sure that you have a good chassis ground. This
will eliminate most electrical noise from the motor and alternator. A good chassis ground
requires a tight connection to ground. The area should be free from rust, paint or any form
of dirt.
Yellow memory backup
Connect to electrical terminal always supplied with power regardless of ignition switch
position.