4
Heat damage – fire hazard
Do not place the camcorder in a location where the temperature may rise
significantly
(e.g. in a car). The case or internal parts could be damaged as a result,
which in turn could cause a fire.
Do not wrap the camcorder up and do not place it on textiles.
This could cause
heat to build up in the camcorder, which could deform the housing, causing a fire
risk.
Risks due to the use of the integrated lithium-ion battery
There is a
risk of explosion if the integrated battery is replaced incorrectly.
Never expose the integrated battery to excessive heat
, such as sunlight, fire etc.
There is a risk of fire and explosion.
The integrated battery must not be thrown into a fire, short-circuited or taken
apart.
There is a risk of fire and explosion.
Dispose of
the battery in accordance with local battery recycling requirements.
information can be obtained from your local council.
Injuries and property damage
Only place the camcorder on stable surfaces.
Otherwise the camera could fall or
tip over, which could damage it or cause injuries.
Do not operate the camcorder when running or driving.
You could trip or cause a
road accident.
Do not place a naked flame, such as a lit candle, on or near the camcorder.
Damage to the electronics, the monitor or the lens, caused by
external influences
like blows, falls or similar, is not covered by the warranty and is therefore subject to
a charge.
Do not drop or knock the camcorder
and always handle it with care. Otherwise it
could get damaged.