11
5.4. Using the helmet mount
You can attach the Action Camcorder to a bike or motor cycle helmet or other suitable
surface such as a surf board, using the helmet mount supplied.
First, stick the 3M adhesive pads
included in the package into the
recesses on the underside of the
helmet mount. Remove the second
protective film from the adhesive
pads and then stick the mount on to
the cleaned surface of the helmet or
surf board.
The adhesive pads can be removed
from virtually any surface without
leaving a residue.
The Action Camcorder can only be
used on the helmet mount when
inside the underwater protective
housing. To do this, screw the screw
mount tightly onto the tripod thread
on the underwater housing. Then sli-
de the screw mount into the recess on
the mount plate until you hear it click.
In order to remove the screw mount
from the mount plate, squeeze the
front clasps together firmly and slide
it out.
Note:
• WARNING: The helmet mount is only suitable for speeds up to 50 km/h!
