11
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: AC 500 Touch
PRODUCT CODE: 46538
08/2014
5.4. Using the helmet mount
You can attach the Action Video Camera to a bike or motor cycle helmet or other
suitable surface such as a surf board, using the helmet mount supplied.
First, stick the 3M adhesive pads included in the package into the recesses on the
underside of the helmet mount. Remove the second film from the adhesive pads
and then stick the mount on to the
cleaned surface of the helmet or surf
board.
The adhesive pads can be removed
from virtually any surface without
leaving a residue.
The Action Video Camera can only
be used on the helmet mount when
inside the underwater housing. To do
this, screw the screw mount tightly
onto the tripod thread on the
underwater housing. Then slide the
screw mount into the recess on the
mount plate until you hear it click.
In order to remove the screw mount
from the mount plate, squeeze the
front clasps together firmly and slide
it out.
You can also adjust the angle of the
camera using the screw on the side of
the screw mount. To do this, unscrew
it a few turns and move the mount
into the desired position. Then
carefully tighten the screw back up.
Note:
•
WARNING: The helmet mount is only suitable for speeds up to 100 km/h!