![background image](http://html1.mh-extra.com/html/maginon/ac-500-bda/ac-500-bda_instruction-manual_3506749014.webp)
12
AFTER SALES SUPPORT
AUS
1800 623 432
MODEL: AC 500 Touch
PRODUCT CODE: 46538
08/2014
6. Operating the video camera
This section describes operating and adjusting the Action Video Camera.
6.1. Switching the video camera on and off
To switch the video camera on, hold down the on/off button on the top for approx. 3
seconds, until the monitor lights up. Press the on/off button again to turn the
video camera off again. If the Action Video Camera is not operated for over 5 minutes,
the device will automatically turn itself off to save power. Likewise, the video camera
automatically switches off once the battery charge level gets too low. In this case the
battery symbol is displayed on the monitor before switching off.
While a video is being recorded the video camera monitor will switch off after a while
to save power. The recording then keeps running, the operation LED lights up red.
Briefly press the on/off button to switch the monitor back on.
6.2. Setting the shooting mode
You can select one of the three following shooting modes using the mode switch on
the side:
[
] Photo mode: For taking individual photos.
[
] Video mode: For making continuous video recordings. The recording only
stops automatically when the memory card is full or the battery is flat.
[
] Vehicle mode: Continuous video recording, stored in individual files of 5
minutes each. Once the memory card is full, the oldest video files are deleted.