![background image](http://html1.mh-extra.com/html/maginon/40747/40747_instruction-manual_3521584011.webp)
9
4.3. Installing the security camera
5IF*1TFDVSJUZDBNFSBDBOCFJOTUBMMFEJOBöYFEMPDBUJPOVTJOHUIFTUBOETVQQMJFE
4.3.1. Fitting stand to camera
Hold the backplate of the foot against the surface of the chosen installation location and use
a pencil to mark the surface with the location of the two drill holes.
To bore the corresponding holes you will need a 6 mm masonry drill for stone or concrete
surfaces or a 3 mm drill if mounting on wood. After drilling, insert the wall plugs (supplied)
in the holes so they site fl ush with the surface. Then screw on the foot using the screws
supplied in the assembly kit.
4.3.2. Fixing the security camera
Place the camera’s threaded tripod bolt onto the mounting plate of the foot and screw the
camera tight using the tripod bolt, then tilt the camera on the tripod bolt into the required
position.
Note:
t 5IFTFDVSJUZDBNFSBTIPVMEOPUCFJOTUBMMFEEJSFDUMZCFTJEFFMFDUSPOJDFRVJQNFOU
as this may result in interference. Should you experience picture interference, test
UIFDBNFSBJOBEJòFSFOUMPDBUJPOöSTU
t $IPPTFBMPDBUJPOUPJOTUBMMUIFTFDVSJUZDBNFSBXIJDIEPFTOPUIBWFTVOMJHIUGBMMJOH
on the lens.
Note:
t 1MFBTFCFTVSFUPPQFSBUFUIFDBNFSBXJUIUIF8J'JBOUFOOBBUUBDIFEBUBMMUJNFT
even if the WiFi connection is not being used, as the camera may otherwise become
damaged.