6
Damage from heat – fi re hazard
Do not leave camera and receiver in places that are susceptible to considerable
increases in temperature
(e.g. in a vehicle). The housing and internal parts may be
damaged, which in turn could cause a fire.
Do not wrap up camera and receiver or place on textiles.
This could produce a build up
of heat in the camera that could cause deformation of the housing and may represent a
fire
hazard.
Injuries and material damage
When setting up or mounting the security camera, be sure to leave at least a 10 cm gap to
all sides in order to ensure adequate ventilation. Take special care to ensure that no
ventilation openings are covered by newspapers, tablecloths or curtains.
Never place open sources of fire onto or beside the camera
Damage to the electronics, lens or accessory caused by
external factors,
such as impacts,
falls or others are not covered by the warranty and are thus chargeable.
Legal Notices
This IP security camera is exclusively intended for indoor surveillance use. It is your
responsibility to ensure that the use of the IP security camera does not violate the
personal rights of third parties.
The video surveillance of public indoor areas (e.g. underground garage) requires a permit
and the premises must be labeled accordingly. In case of uncertainty, please contact the
respective local authority.