![background image](http://html1.mh-extra.com/html/maginon/2500x/2500x_manual_3528827030.webp)
30
DLP
Changing settings procedure (using either the Projector Control Panel or the Re-
mote Control):
1. Press the MENU button to display OSD menu.
2. Press the or button to select PICTURE menu.
3. To enter the sub-menu setting, press the button.
4. Press the or button to select the sub-menu item.
5. Press the or button to adjust the value of desired sub-menu item.
On the Auto Image (RGB Picture) and More Option (YPbPr Picture 1) sub-menus,
press the button to confirm the selection.
6. After you have done with the adjustment of a sub-menu item:
a. To resume changing another sub-menu item: press the or button.
b. To exit from the current menu: toggle the MENU button.
The following table provides details of the available sub-menus choices:
Sub-menu
Option
Description
Brightness
The higher the setting, the brighter the image.
The lower the setting, the darker the image.
Contrast
The higher the setting, the greater the contrast.
The lower the setting, the lower the contrast.
H position
Adjusts the horizontal position.
V position
Adjusts the vertical position.
Phase
Removes unwanted vertical lines from a computer
image by matching the projector’s internal clock to the
computer display signal.
Frequency
Adjusts the display data frequency to match the
frequency of your computer’s graphic card. When a
vertical flickering bar appears, use this function to make
an adjustment.