24
DLP
Operational Indicator (LED)
There is one LED on the top of the projector to indicate the state of the projector and
the lamp. It provides valuable information about the projector:
LED COLOR
STATUS
MEANING
Green
Solid
The projector is powered and ready. The lamp is
currently on and is projecting at maximum brightness.
Green
Flashing
LAMP (T urning on):
When the Power button is pressed, the lamp will turn
on and the LED indicator will light green after 3 seconds.
If it is not successfully turning on, the lamp will
automatically light up for another two times. If the lamp
still cannot be turned on at last, wait for 30 seconds for
cooling (LED indicator flashes red). When the LED
indicator turns red, press the Power button again to
light up the lamp.
LAMP (T urning off):
When turning off the lamp, the LED indicator will flash
(green) to indicate the projector is shutting down.
At the same time, the fan motor will cool down for 2
minutes, and then the LED indicator will turn red to
indicate the fan motor is turned off and the lamp has
cooled.
Note:
Do not unplug the power cable or turn the power switch
Off before the lamp LED becomes red. During the
cooling & warming up procedures the projector won’t
accept any key in command.
Red
Solid
When main power is turned on, the projector is in
standby mode. (Lamp off)