EN-28
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
User’s Manual
Projector
4. Press the or to select YES if you want to restore all projector settings to the
factory defaults.
5. Press the button to confirm the selection.
6. To exit from the current menu, toggle the MENU button.
Other Related OSD Menus
Following are the descriptions on the on-screen display menus with video input sources
and without input source attached to your projector.
Video Input Signal
If the input signal comes from S-video, composite video or component video (YCbCr),
you may see different PICTURE menu interface.
Picture Menu
This menu provides precise control of the projected image including:
brightness, contrast, saturation, tint, sharpness and aspect ratio.
Changing settings procedure (using either the Projector Control Panel or the Remote
Controller):
1.Press the MENU button to display OSD
menu.
2.Press the or button to select
PICTURE menu.
3.To enter the sub-menu setting, press
the MENU button once again.
4.Press the or button to select the
sub-menu item.
5.Press the or button to adjust the value of desired sub-menu item.
6.After you have done with the adjustment of a sub-menu item:
a.To resume changing another sub-menu item: press the or button.
b.To exit from the current menu: toggle the MENU button.