EN-27
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
. English .
User’s Manual
Projector
The following table provides detail of the available sub-menu choices:
Sub-Menu
Option
Description
Language
Selects the language used in the OSD(on-screen
display) menus.
OSD Timeout
Duration OSD menu stays active (at idle state).
OSD PosiH
Adjusts OSD menu display position (horizontally -
left & right) on the screen.
OSD PosiV
Adjusts OSD menu display position (vertically - up
& down) on the screen.
Rear
The image is reversed horizontally.
Yes
Rear projection is active.
No
Rear projection is inactive.
Ceiling
The image is inverted vertically.
Yes
Ceiling projection is active.
No
Ceiling projection is inactive.
Auto Off
Automatically turns off the lamp if the projector does
not detect an input signal for specified time period
(30 minutes).
Yes
Auto Off is active.
No
Auto Off is inactive.
Lamp Life
Displays lamp’s lifetime counter (by hour).
Note:
Lamp life counter is displayed in read-only format, and this setting cannot be manually
adjusted.
Reset Menu
This menu allows you to restore all projector settings and adjustments back to the
factory defaults.
Changing settings procedure (using either the Projector Control Panel or the Remote
Controller):
1.Press the MENU button to display
OSD menu.
2.Press the or button to select
RESET menu.
3.To enter the sub-menu setting, press
the MENU button once again.